This International Standard specifies an empirical test procedure for assesing the resistance of a coating of paint, varnish or related product to cracking and /or detachment from a metal substrate when subjected to bending round a cylindrical mandrel under standard conditions. For a multicoat system, each coat may be tested separately or the complete system may be tested. The method specified may be carried out either as a "go/no go" test, by carrying out the test with a single specified size of mandrel, to assess compliance with a particular requirement or by repeating the procedure using seccessively smaller mandrels to determine the diameter of the first mandrel over which the coating cracks and/or becomes detached from the substrate. Two types of apparatus are specified, Type 1 being appropriate for use on test panels of thickness up to 0,3 mm, and Type 2 for use on test panels of thickness up to 1,0 mm. Both types of apparatus have been found to give similar results with the same coating, but normally only one will be used for testing a given product.