This European Standard specifies test methods for the determination of the overall migration into fatty foodsimulants from plastics materials and articles, by total immersion of test specimens in a fatty food simulant attemperatures from 100 C up to and including, 175 C for selected times. Also described is a procedure with asubstitute test medium. In this substitute procedure the mass of components adsorbed on modified polyphenyleneoxide (MPPO) is taken as a measure for the assessment of the overall migration into olive oil.NOTE 1The total immersion test method has been written for use with the fatty food simulant, olive oil. The test method canalso be used with appropriate modifications with 'other fatty food simulants' called simulant D - a synthetic mixture oftriglycerides, sunflower oil and corn oil. These other fatty food simulants produce different chromatograms for the simulantmethyl esters to those of the methyl esters of olive oil. Suitable chromatogram peaks of the methyl esters of the other fatty foodsimulants should be selected for the quantitative determination of the simulant extracted from the test specimens.NOTE 2A comparative migration test carried out with polypropylene and polyethylene terephthalate high temperatureapplication containers as test samples at conditions 2 h at 100 C and 2 h at 175 C, respectively, in contact with 14C-labelledsynthetic triglyceride and MPPO provided test results comparable within the analytical tolerance of the methods.NOTE 3To obtain reproducible and repeatable results using the MPPO method it may be necessary to measure thetemperature of the test specimen before starting the migration period. An appropriate method for measuring the temperature ofthe test specimen needs to be established.The described methods are most suitable for food contact articles in the form of sheets and films, but can also beapplied to a wide range of articles and containers.